To connect your turntable to a home theater setup, you need a phono preamp. This device correctly equalizes the turntables audio signal. Itll either be built into the turntable or the receiver, or youll need to buy a separate device.
How do I connect my record player to my sound system?
Join the turntable to the preamp using the RCA cable. Join the speaker to the preamp using the speaker by plugging the RCA input side of your cable into the preamp and the 3.5mm side of your cable into your Bluetooth speaker.
How do I connect my turntable to my AV Receiver?
0:272:01How to Connect a Fluance Turntable to a Home Theater A/V Receiver or YouTube
How do I connect my turntable to my receiver?
The receiver has a built-in phono preamp with an input labeled PHONO. All you have to do is plug your turntables audio signal cable into the receivers phono input. Just below the phono input is a metal post labeled GND, for ground. Connect your turntables ground wire (if it has one) to this post.
Can I plug a turntable into AUX?
This turntable has a built-in phono preamp. Simply plug the turntables audio signal cable into one of the receivers analog audio inputs. These inputs are oftentimes labeled Aux (auxiliary), Line In, Analog In, etc. You can even use your receivers CD or Tape input, if needed.
Can you use computer speakers with a turntable?
Question: Can I listen to my USB turntable through my PC speakers? Answer: The quick answer is yes, but note that computers are designed to be “playback” devices and not necessarly “play through” devices, such as a stereo receiver, so you may need to change some settings in your computer for proper operation.
Can you use a turntable without a preamp?
It is not possible to play vinyl records without a preamp included in the system. If your turntable doesnt have a preamp, you can use a separate preamp, or a receiver with a preamp built-in.
What is the difference between Aux and phono?
A turntable produces a PHONO output signal. This phono signal needs to be converted to a LINE LEVEL signal (sometimes referred to as AUX signal) to work with audio equipment including stereo systems, computers, and speakers. A phono preamp converts PHONO to LINE LEVEL.
Can you connect a turntable to Aux?
Connect the RCA cables from your turntable to the aux input on your receiver. Locate the preamp on the rear of your receiver and be sure the switch is selected to “Line”. Select Aux on your receiver and begin playing your turntable to enjoy music.
Yes, the aux input on a receiver can be used for phono, but only if you use a stand alone phono preamp for your turntable or if your turntable has a built in phono preamp.
A turntable produces a PHONO output signal. This phono signal needs to be converted to a LINE LEVEL signal (sometimes referred to as AUX signal) to work with audio equipment including stereo systems, computers, and speakers. A phono preamp converts PHONO to LINE LEVEL.