How do you connect car stereo wires?

0:435:41How to Install an Aftermarket Car Stereo, Wiring Harness and Dash KitYouTubeStart of suggested clipEnd of suggested clipFirst well start with the power wire. Well need to go ahead and strip. This. As a little tip whenMoreFirst well start with the power wire. Well need to go ahead and strip. This. As a little tip when using bug connectors we always bend the last quarter. Over put in the connector. Go ahead and crimp.

What wires go together in a car stereo?

The right-front speaker wires are gray, left-front speakers are white, right-rear speakers are purple, and left-rear speakers are green. Ground wires are black, antenna wires are blue, and amplifier wires are blue with a white stripe.

What color is the constant 12v wire?

yellow Constant (yellow), also called BAT or Battery, provides permanent +12V power from battery.

Can I connect a black wire to a yellow wire?

The black hots need to stay together. You need to identify which black on the new switch is always hot or line in and connect that to these two wires with a wire nut. The yellow wire is the switched hot on the new switch - that should be the other black. Might be called switched or load.

What color is the power wire for a car radio?

Depending on the type of car you have, each wires function can vary. However, typically the red wire indicates Power, black indicates Ground, yellow indicates Remote, and striped, multicolored wires indicate speaker wires.

What is the blue wire for on a car stereo?

One thing to note, most head unit wiring harnesses also have a solid blue wire. This wire is typically for power antenna or factory amplifier turn on, do not get this wire confused with the remote turn on wire with the blue/white stripe.