How do I fix my Vonage device?

Disconnect the power cord AND the telephone cord from the back of your Vonage adapter. Unplug the power to the main base of your telephone, wait a few seconds and plug it back in. Reconnect the power to the Vonage adapter and let it restart. Reconnect the telephone cord to the Vonage adapter and check for a dial tone.

How do I reset my Vonage box?

0:162:37Vonage How To: Restarting your Device - YouTubeYouTubeStart of suggested clipEnd of suggested clipSuggested clip · 61 secondsTo get started unplug the power source for all of your network devices. Including your high-speedMoreTo get started unplug the power source for all of your network devices. Including your high-speed modem vonage box and router. If you are using one wait two minutes before reconnecting the devices.

How do I find my Vonage IP address?

How to find out your Vonage router gateway IPOpen a terminal window (Shortcut on some distros: ctrl + alt + t )You will be presented with your Vonage routers IP address.

How do I use my Vonage device?

Connect the Vonage Box power supply to the orange Power port and connect the plug end into a power source. blinks slowly if you have voicemail messages. Connect your phone cord to the green Phone 1 port on the Vonage Box phone adapter. Pick up telephone handset and listen for a dial tone.

Does Vonage require a static IP?

All devices on a network have IP addresses. Since the router will not necessarily give the devices the same IP address every time, you will need to assign a static IP address to the Vonage adapter before setting up Port Forwarding. This will ensure the IP address of the adapter will not change.

What is the default password for Vonage?

router Open Web-Based User Interface Enter 192.168. 15.1 or V-Configure in the address bar of your browser. Enter User Name and Password, which by default is router for both.

What protocol does Vonage use?

SIP, UDP, and RTP Protocols Vonage uses these protocols to send and receive traffic.